DST tools Vertical shock absorber for cased hole 5"OD

Cased hole DST tools Vertical shock absorber 5"

Brief introduction

The Vertical Shock Absorber is designed to protect pressure measuring equipment from vertical

shock loads transmitted through the workstring by the firing of tubing-conveyed perforating

guns. The Vertical Shock Absorber can be used to protect other sensitive components in the

tool string.

Operation

The Vertical Shock Absorber is normally run below the packer and is always run between the

gauge carrier and the tubing-conveyed perforating guns. It is recommended that the Vertical

Shock Absorber be run in conjunction with a drag block assembly for effective shock

absorption.

A 3 3/8-in. OD Vertical Shock Absorber is avaliable with a blank ID. When run in the

workstring, this absorber is located below the TCP guns and above the gauges.

Technical Parameter

Material Traceability SGS

Testing Equipment

ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.

To shorten the delivery time, we proceeded the DST Tools in stock:

Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester

1. Full bore Packer, 7" Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set

2. Tester valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets

3. Hydraulic Jar,5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

4. Rupture disk Circulating valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

5. Flowhead (surface test tree), 3 1/16", working pressure 70 Mpa. 1set

Should you have any interest or inquiry on the Drill stem testing tools, contact us freely.