5" LPR-N Valve, working pressure: 15000psi

Introduction

The Tester valve is a full-opening, annulus pressure operated tool. With applied pressure, the tool can be locked open and then returned to the normal operating sequence at any time. The ball valve operates independently of pressure changes from operations such as acidizing and fracturing. This gives theTester valve greater compatibility and flexibility with other tools in the string.It is fully balanced to annulus pressure and will remain in the closed position while tripping in hole. Operation of the LPR-N valve insensitive to tubing pressure changes

The nitrogen chamber is charged at the surface to a selected pressure determined by surface temperature and

bottom hole temperature and pressure.

If the intended test requires a permanent packer that uses a stinger mandrel or seal nipple,a variety of Halliburton

by pass tools are available,depending on field application,to help ensure that the formations and downhole

equipment are protected from excessive pressure build up.

Features and Benefits

•The ball valve operates independently of internal pressure changes,like with acidizing or fracturing operations.

•Drastic temperature changes,like inacidizing operations,have little affecton the tool.

•Advanced materials and processes provide a uniquemetal-to-metal seal for exceptionalgas-holding capabilities.

•The valve has been through an extensive 5-day qualification testing at 400°Fand 15,000-psi burstand collapse

pressures.

•An open-in feature allows the operator to run the valve in the hole with the ball valve opened orclosed.

•Adouble nitrogen chamber can be added to the valve for use in deep,hot,high pressure wells to reduce the

operating pressure

The main parts of the tester valve
Lower metering sleeve                                                                      Ball valve holder
      

      

Ball valve section of the tester valve

ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.

To shorten the delivery time, we proceeded the DST Tools in stock:

Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester

1. Full bore Packer, 7" Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set

2. Tester valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets

3. Hydraulic Jar,5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

4. Rupture disk Circulating valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets

5. Flowhead (surface test tree), 3 1/16", working pressure 70 Mpa. 1set

Should you have any interest or inquiry on the Drill stem testing tools, contact us freely.