XI'AN ZZ TOP OIL TOOLS CO.,LTD
|
Price: | 500.0 USD |
Payment Terms: | T/T,L/C,D/A |
Special Groups: |
Case hole DST (111)
DST Tools (146) DST LPR N valve (5) DST Tester valve (15) Drill stem testing Tester valve (14) drill stem testing (124) Open Hole DST (53) |
Place of Origin: | Shaanxi, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
3 7/8" * 15000 psi Downhole tester
Tester valve
The downhole tester used for drill stem testing is a full-opening, annulus pressure-operated valve.It permits measuring multi pleclosed-in
pressures in cased holes where pipe manipulation is restricted and a full-opening string is required.
The nitrogen chamber is charged at the surface to a selected pressure determined by surface temperature and
bottom hole temperature and pressure.
If the intended test requires a permanent packer that uses a stinger mandrel or seal nipple,a variety of Halliburton
by pass tools are available,depending on field application,to help ensure that the formations and downhole
equipment are protected from excessive pressure build up.
NO. | Specification | 5" |
1 | OD | 5"(127mm) |
2 | ID | 2.25"(57mm) |
3 | Length(mm) | 288.2"(7319.5mm) |
4 | Working pressure | 15000 PSI(105Mpa) |
5 | Maximum open pressure differential | 5000PSI(35Mpa) |
6 | Tensile strength(Yield) | 2020.5kN |
7 | Internal Pressure Strength | 151Mpa |
8 | External Pressure Strength | 141Mpa |
9 | Torque strength | 30.9kN.m |
10 | Service Environment | Mud, crude oil, natural gas with H2S, Apply to NACE MR0175-2003 |
11 | End connection | 3 7/8CAS. BXP, 3 1/2 IF BXP |
12 | Service temperature | -20oF~400oF |
Operation
Once the packer is set, pressure is quickly applied to the annulus to operate the Full Bore Tester valve. This creates the differential pressure that acts across the operating section to move the mandrel down, causing the ball to rotate to the open position. To close the ball, annulus pressure is released to zero. The nitrogen section acts to move the operating mandrel up. This upward travel of the mandrel rotates the
ball valve back to the closed position. To activate the lockout feature, the normal operating pressure is increased by 1,300 psi.
This higher level of pressure prevents the operating mandrel from moving up. In this position, the ball valve will remain open when the annulus pressure is released. To reactivate the tool, annulus pressure is once again increased to 1,300 psi above normal operating pressure. This will reactivate the operating section and return the tool to normal operating mode. The lockout feature can be reactivated as many times as desired without having to remove the tool from the well.
Parts of downhole tester
Ball valve section
Test chart of tester valve
ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.
To shorten the delivery time, we proceeded the DST Tools in stock:
Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester
1. Full bore Packer, 7" Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set
2. Tester valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets
3. Hydraulic Jar,5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets
4. Rupture disk Circulating valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets
5. Flowhead (surface test tree), 3 1/16", working pressure 70 Mpa. 1set
Should you have any interest or inquiry on the Drill stem testing tools, contact us freely.